Design and Test of Ignition Temperature Test Device for Powder
- 摘要
|
- 图/表
|
- 访问统计
|
- 参考文献
|
- 相似文献
|
- 引证文献
|
- 资源附件
|
- 文章评论
摘要:本文介绍了一种金属粉末点火温度测试装置的设计方案及实现过程,通过大功率直流电源加热点火丝,点燃附着在点火丝上面的粉末,以光电探测器测试光强变化过程作为点火过程的指标,通过红外热电偶测试点火丝未涂敷粉末部分温度,作为粉末点火时的温度。利用该装置对镁粉、稀土合金氢化物、硼镁合金MgB2 3种粉末进行点火温度测试试验,点火温度分别为446℃、234℃、997℃,证明该方法能够满足粉末点火温度测试要求。
Abstract:The design and realization process of an ignition temperature measuring device was proposed. The powder is ignited on the ignition wire through a high-power DC power supply. A photoelectric cell tests the change process of the brightness as the ignition process. The temperature of the wire without the powder is tested by the infrared thermocouple as the powder ignition temperature. The ignition temperature test of three powders of Mg powder, rare earth alloy hydride powder and MgB2 powder was tested with this device, the results were 446℃, 234℃ and 997℃ respectively. It proved that the method could meet the requirement of powder ignition temperature test.
var swiper = new Swiper('.swiper_xq', {
navigation: {
nextEl: '.swiper-button-next',
prevEl: '.swiper-button-prev',
},
});
$(function(){
$('img').bigic();
});
jQuery(".slideTxtBox").slide({ trigger: "click" });